What should be noted during plastic injection molding operations?
Release time:
2023-05-26
1. Check whether the process parameters are the same as the actual model, material, and mold;
2. When inputting process parameters simultaneously, start producing the first can of beer at a slightly reduced pressure rate, and then gradually adjust it (based on the product quality ratio);
When there are no process parameters, it is important to know the mold structure, adhesive dosage, and other adjustments. Blindly adjusting is strictly prohibited. Note that if the dedicated mold is not glued enough, it will stick to the mold, and if there is too much glue, it will stick to the thread.
Informationization in the plastic mold industry has become a trend
In recent years, the plastic mold industry has developed rapidly in China, accompanied by increasingly fierce market competition.
2023-09-05
What should be noted during plastic injection molding operations?
1. Check whether the process parameters are the same as the actual model, material, and mold;
2023-05-26
Address: 3rd Floor No268, Tonganyuan, Industrial Park, Tongan Distric t, Xiamen, China, 361000
